ECS 3L Small Form Factor, Manual

Page: 38 / 64

33
Using BIOS
HPET (Enabled)
This item enables or disables HPET (High Precision Event Timer) support.
Memory Remap Feature (Enabled)
This item allows you to remap the overlapped PCI memory above the total physical
memory if you have a 64 bit OS and 8 GB of RAM.
Share Memory Size (64MB)
This item lets you allocate a portion of the main memory for the onboard VGA
display application.
DVMT/FIXED Memory (256MB)
When set to Fixed Mode, the graphics driver will reserve a fixed portion of the
system memory as graphics memory. When set to DVMT Mode, the graphics chip
will dynamically allocate system memory as graphics memory, according to system
and graphics requirements.
ME Subsystem Configuration (Press Enter)
This page sets up some parameters for ME use.
f
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
ME Subsystem Configuration
Help Item
mnlk
: Move
F10: Save ESC: Exit
Enter: Select
+/-/: Value
F9: Load default settings
F1: General Help
ME Subsystem Configuration
BootBlock HECI Message Enabled
HECI Message Enabled
End Of Post S5 HECI Message Enabled
ME HECI Configuration
ME-HECI Enabled
ME-IDER Disabled
ME-KT Disabled
Disabled
Enabled
Options
BootBlock HECI Message (Enabled)
Use this item to enable or disable bootblock HECI (Host Manageability Engine
Communication Interface) message.
HECI Message (Enabled)
T his item allows you to enable or disable HECI (Host Manageability Engine Com-
munication Interface) message.
End Of Post S5 HECI Message (Enabled)
This item allows users to enable or disable end of post S5 HECI (Host Manageabil-
ity Engine Communication Interface) Message.