background image

39

Using BIOS

Spread Spectrum (Enabled)

If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.

Press <Esc> to return to the main menu setting page.

Supervisor Password (Not Installed)

This item indicates whether a supervisor password has been set. If the password has
been installed, 

Installed

 displays. If not, 

Not Installed 

displays.

Supervisor Password

This page helps you install or change a password.

Press <Esc> to return to the main menu setting page.

CMOS Setup Utility - Copyright  (C)  1985-2005, American Megatrends, Inc.

                 Supervisor Password

Install or Change the
password.

Help Item

Supervisor Password  :  Not Installed

Change Supervisor Password

Press Enter

Load Default Settings

This option opens a dialog box to ask if you are sure to install optimized defaults or
not. You select [OK], and then <Enter>, the Setup Utility loads all default values; or
select [Cancel], and then <Enter>, the Setup Utility does not load default values.

mnlk

: Move

F10: Save     ESC: Exit

Enter: Select

+/-/: Value

F9: Load default settings

F1: General Help

Change Supervisor Password (Press Enter)

You can select this option and press <Enter> to access the sub menu. You can use the
sub menu to change the supervisor password.

CPU Frequency Setting (333MHz)

This item indicates the current CPU frequency. Users can not make any change to
this item. Please note that the frequency will be varied with different CPU.

Auto Detect DIMM/PCI Clock (Enabled)

When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.

Summary of Contents for 3L Small Form Factor

































































Reviews: