Helios Junior, User’s guide
02/2008
Page 31
ECRESO – 20, avenue Neil Armstrong – Parc d’Activites JF Kennedy – 33700 Bordeaux-Merignac – France
Tel: +33(0) 556 675 454 – Fax: +33(0) 556 675 167 – www.ecreso.com – [email protected]
SET DISPLAY
BARGRAPH POWER
To display one of the four following parameters under the line that
indicates frequency and power.
BARGRAPH POWER
- OK
+
Selects bargraph of the output power.
STATION/BARGRAPH
- OK +
Displays in half time the radio name and the bargraph of the output power.
BARGRAPH DEV
- OK +
Displays deviation bargraph.
STATION’S NAME
- OK
+
Selects radio name.
SET NAME
Validate one of these 4 options. Makes it possible to give a name to your
transmitter (8 characters), then accept.
SET NAME
- ---- +
+ and – buttons allow you to scroll letters and numbers. The ENTER
button selects characters. If necessary, include spaces in order to have 8
characters: validating the 8th character validates the whole name.
CONFIG MENU
EXIT
Go back to this screen to go out of the configuration menu, and then press
ENTER.
6.2.2.
Information screen
Information screens enable display of transmission frequency, output power, reflected power, VSWR,
deviation, depending on the settings of the system.
On the bargraph, a large bar indicates the maximum value was exceeded.
To navigate through the menus, see figure: “Normal operation Menu”.
98.00MHz 3W
IIII
Main information screen: it displays frequency and transmission power.
The information you set to on the configuration menu appears on the
second line.
Pr=0.0W VSWR=1.0 To visualize the reflected power and the estimated VSWR (automatic
return to the first menu after 15 seconds).
DEV= 0k Pk= 0k
To check the average deviation and peaks per value and bargraph (after
15 seconds the display goes back to the first menu automatically).
Summary of Contents for HELIOS JUNIOR
Page 2: ......