Helios Junior, User’s guide
02/2008
Page 30
ECRESO – 20, avenue Neil Armstrong – Parc d’Activites JF Kennedy – 33700 Bordeaux-Merignac – France
Tel: +33(0) 556 675 454 – Fax: +33(0) 556 675 167 – www.ecreso.com – [email protected]
6.2.1.
Setting of parameters
The set-up enables customizing your transmitter settings.
It allows you to select transmission frequency, output power, deviation, name of the FM radio.
To navigate through the menus, see section 4.2: ‘Menu selection’.
GONFIG MENU
EXIT
This screen is on the main access to the configuration menus. The + and –
buttons are used to scroll between menus. To exit the menu, press ENTER.
FREQUENCY
98.00MHz
To change frequency, press ENTER.
FREQUENCY PROG
- 98.00MHz
+
FREQ: 100.00MHz
BACK OR CANCEL
20W
IIIIIIIIIIIIIIII
Using the + or – buttons, edit the desired transmission frequency (0.01 MHz
resolution). Then press ENTER. To increase or decrease the frequency
speed, press continuously the + or - buttons.
This menu makes it possible to :
-> go back to edit the frequency (press -).
-> exit the frequency menu canceling previous settings (press +).
-> accept the next frequency.
Displays output power.
Turn the RF Power potentiometer to reach the desired power. Then press
the + button to go to the next screen.
USE ADJUSTMENT
TO CHANGE
POWER
This reminds you it is necessary to use the potentiometer to set the power if
you have pressed ENTER in the previous menu.
Pr=0.2W VSWR=1.2
IIII
Displays reflected power (Pr) in watts and the VSWR value, and displays
the reflected power on the bargraph.
ONLY FOR
INFORMATION
This reminds you it is necessary to use the potentiometer to set the power if
you have pressed ENTER in the previous menu.
DEV=75k Pk=78k
IIIIIIIIII I
Displays the average deviation (DEV) in kHz and its peak (PK) while reading
the bargraph. Turn the potentiometer (Mono/MPX) to reach the desired
deviation. Then press the + button.
USE ADJUSTMENT
TO CHANGE DEV
This reminds you it is necessary to use the potentiometer to set the
deviation if you have pressed ENTER in the previous menu.
NO EVENT
HELJR Rel. 2.01
EVENT indicates there have been events during operation. HELJR identifies
the transmitter. Rel X.XX indicates software version.
Summary of Contents for HELIOS JUNIOR
Page 2: ......