Set Up Recommendations 1-2-3
Charge Your
EcoPebble Powerbank
Before you power on your EcoPebble
Powerbank, connect the micro USB port
to the USB cable and a power source to
fully charge your EcoPebble Powerbank
for best performance.
RECOMMENDED:
Before using your
EcoPebble Powerbank for the first
time, charge the unit until all 4 LED
blue battery level indicators on the top
panel are solid, indicating a full charge.
A blinking LED indicates the battery is
charging at the level indicated by the
blinking LED.
Approximately 7 hours of charging is
required from a low to a full charge.
Power source options include the USB
connection to your computer or a power
outlet using a USB to AC power adapter.
It is recommended to always use the
USB cable included with your EcoPebble
Powerbank.
1
2 Power On, Battery,
& LED Status Indicators
Once fully charged, press & hold the
Standby Power Button
on the top
of your EcoPebble Powerbank for
approximately 4 seconds. You will see
a red LED for a moment that shall turn
blue, the blue LED shall blink quickly
and “Power On” followed by “Pairing
Ready” is announced. Release the
Standby Power Button when the blue
LED appears and/or the announcement
is heard.
IMPORTANT:
Make sure that the
Main Power Switch, located in the
compartment under the cap on the
bottom of the device, is set to the ON
position. If the switch is in the OFF
position, your EcoPebble Powerbank will
not be able to turn on using the Standby
Button and power the speaker.
The LED battery level indicators are
located on the top of the device. Each
bar represents 25% of a charge, with 4
full LEDs indicating a full charge.
Summary of Contents for EcoPebble Powerbank GDI-EXPPB100
Page 1: ......
Page 2: ...Models GDI EXPPB100 101 User Guide EcoPebble Powerbank ...
