background image

Optional Accessories

FCC COMPLIANCE STATEMENT & WARNING:

This device has been tested & found to comply with the limits for a Class 
B digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference in 
a residential installation. The device generates, uses & can radiate radio 
frequency energy & if not installed & used in accordance with instructions 
may cause harmful interference to radio communications. There is no 
guarantee that interference will not occur in a particular installation. If this 
device causes interference to radio or television reception try one of these 
measures: reorient or relocate the receiving antenna, increase separation 
between device & receiver, connect the device into an outlet on a circuit 
different from that to which the receiver is connected, consult a dealer or 
experienced radio / TV technician for assistance. Changes or modifications 
not expressly approved by the party responsible for compliance could void 
the user’s authority to operate the device and/or void the manufacturer’s 
limited warranty.

PRODUCT USE AND PROTECTION:

Read and Follow all Instructions. Use only as intended.

The ECOXGEAR device is intended to be used indoors or outdoors 
and in land or water environments. The device has been tested to IP67 
waterproofing standards which means the device can be submerged in up to 
3 feet of water for 30 minutes without any damage. However, the device is 
not intended for constant underwater use. 

Always make sure the cap(s) / covers(s) are clean, free from sand or debris 
and correctly fitted. The device will only meet IP67 ratings if all rubber seals, 
gasket(s) and cap(s) / covers(s) are in place. If you notice a muffling of audio 
after submersion gently shake the unit to clear excess water. If your device is 
exposed to salt water clean it thoroughly after use with fresh water.

The USB cables, power adapters, and unit with an improperly fitted cap, are 

NOT

 waterproof. 

To prevent fire or shock, do not attempt to charge this unit if it is wet or you 
suspect water has entered the unit. In this situation, please return the unit to 
Grace Digital for a free assessment. If we have found that the unit has carried 
water we will repair or replace the unit free of charge.

SAFETY ADVISORY & WARNING:

Read and Follow all Instructions. Use only as intended.

CAUTION: Do 

NOT

 open to repair. A qualified technician must carry out 

repair work. 

CAUTION: 

ATTENTION: Do 

NOT

 charge while the unit is wet. Towel dry 

the unit 

AND

 make sure all connections are dry 

BEFORE

 

For Charging

AC (5V, 2A) USB Wall Outlet Power Adapter
AC (5V, 1A) USB Car Power Adapter

For Mounting

Suction Cup Mount (¼” mount)
Handlebar Mount Adapter (¼” mount)

Models: GDI-EXPPB100/101

User Guide

Eco

Pebble Powerbank

USB Cable

User Guide

EcoPebble

Powerbank Unit

Carabiner 

Summary of Contents for EcoPebble Powerbank GDI-EXPPB100













Reviews: