PRESS AND HOLD
to reject
an incoming call.
NOTE:
To use this
feature, the EcoJourney
MUST
be paired with
your Bluetooth device.
LED Status Indicators
There are four LED Status
Indicators. When you turn on
the EcoJourney, the green
LED above the Standby
Power Button on the Front
Panel will also turn on. The
green LED will turn off when
the speaker is turned off.
Connect USB-C Input on
the Inside Panel to a power
source. The right LED above
the Power Button on the
Front Panel indicates USB
connection Charging Status.
RED:
Charge in process
GREEN:
Full charge complete
When you turn on the
EcoJourney, the blue LED
above the Bluetooth Button
on the Front Panel indicates
Bluetooth Status.
FLASHING:
Ready to pair
SOLID:
Bluetooth
connection successful
Refer to
Set Up
Recommendations 1-2-3
for
additional details.
The last LED Status Indicator,
above the EcoCast Button
indicates the following
Mode Statuses: EcoCast
Broadcasting, EcoCast
Receiving, and AUX-IN.
FLASHING RED:
EcoCast
Broadcasting, ready to pair
SOLID RED:
EcoCast Broadcasting,
connection successful
FLASHING GREEN:
EcoCast
Receiving, ready to pair
SOLID GREEN:
EcoCast Receiving,
connection successful
SOLID YELLOW:
AUX-IN
Battery Level Indicators
There also are four LED
Battery Level Indicators
located on the front of the
unit. Each LED represents
25% of a charge. Four full
LEDs indicate a full charge.
Refer to
Set Up
Recommendations 1-2-3
for
additional details.
Speakerphone Mic
The integrated Speakerphone
Mic on the Front Panel allows
you to answer mobile calls
and use the EcoTalk feature.
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1 ) This device may not cause harmful interference, and
2) This device must accept any interference received, including interference that may cause
undesired
operation.
WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures: reorient or relocate the receiving antenna, increase the separation
between the equipment and receiver, connect the equipment into an outlet on a circuit different
from that to which the receiver is connected, consult the dealer or an experienced radio/TV
technician for help.
RF WARNING STATEMENT:
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
IC STATEMENT:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
1 ) This device may not cause interference, and
2) This device must accept any interference, including interference that may cause undesired
operation of the device.
PRODUCT USE AND PROTECTION:
Read and follow all instructions. Use only as intended.
The EcoJourney Bluetooth speaker is intended to be used indoors or outdoors and in land or
water environments. The speaker has been tested to IP67 waterproofing standards, which means
the speaker can be submerged in up to 3 feet of water for 30 minutes without any damage.
However, the speaker is
NOT
intended for constant underwater use.
Always make sure the clasp(s) / latch(es) / covers(s) are clean, free from sand or debris, and
correctly fitted. The speaker will only meet IP67 ratings if all rubber seals, gasket(s), and cover(s)
/ clasp(s) / latch(es) are in place. If you notice a muffling of audio after submersion, gently shake
the unit to clear excess water. If your speaker is exposed to salt water, clean it thoroughly after use
with fresh water.
The USB cables and unit with an improperly secured latches are
NOT
waterproof.
To prevent fire or shock, do
NOT
attempt to charge this unit if it is wet or you suspect water has
entered the unit. In this situation, please return the unit to ECOXGEAR for a free assessment. If
we have found that the unit has carried water, we will repair or replace the unit free of charge.
Perform recommended safety and waterproof checks prior to use in a water environment.
ECOXGEAR is
NOT
liable for damage to contents in Case.
