Ecox EPTL, Owner'S Manual

Page: 9 / 16

9
REMOTE CONTROLLER
SPLIT AIR CONDITIONER
EPTL
2
2
3
4
1
1
3
Start
Ensure the unit is plugged in and power is available.
The OPERATION Indicator on the display window of the
indoor unit illuminates.
Mode select button (MODE)
Press to select AUTO.
Temperature button (TEMP)
Set the desired temperature normally set it between 21º
C and 28º C.
ON/OFF button
Press the ON/OFF button to start the air conditioner.
Stop
ON/OFF button
Push this button again to stop the air conditioner.
If the AUTO mode is uncomfortable, you can select the
desired conditions manually.
When you select the AUTO mode, you do not have to
set the fan speed. The fan speed will be automatically
controlled.
Start
Ensure unit is plugged and power is available.
Mode select button (MODE)
Press to select COOL, HEAT (Cooling & Heating models
only), or FAN mode.
Temperature button (TEMP)
Set the desired temperature, the most comfortable
temperature is between 21º C and 28º C.
Fan speed button (FAN SPEED)
Press to select "AUTO", "LOW", "MED" and "HIGH"
ON/OFF button
Press the ON/OFF button to start the air conditioner.
The OPERATION Indicator on the display panel of the
Indoor unit illuminates. The operating mode is selected
on accordance with the room temperature and operation
starts after approximately 3 minutes (If you select FAN
mode. The unit will start immediately).
COOL / HEAT / FAN OPERATION
1
2
3
1
2
3
4