7
REMOTE CONTROLLER
SPLIT AIR CONDITIONER
EPTL
1
2
3
14
15
16
13
TIMER OFF Button: Press this button to initiate the auto-off time sequence. Each
press will increase the auto-timed setting in 30 minutes increments. When the
setting time displays 10 h, each press will increase the auto-timed setting 60 minutes
increments. To cancel the auto-timed program, simply adjust the auto-off time to
0.0.
LOCK Button: Press this recessed button to lock all current setting, and the remote
control will not accept any operation except that of the LOCK, use the LOCK mode
when you want to prevent settings from being changed accidentally. Press the LOCK
button again to cancel the LOCK function, A lock symbol will appear on the remote
control display when the lock function is activated.
TURBO Button: Push this button to activated the Turbo function wich enables the
unit to reach the present temperature in the shortest time. When press this button
on cooling mode, the unit will blow strong cooling air with super high fan speed,
When press this button on heating mode (applicable to the unit adopts PTC only),
the PTC wil be energizer and bring fast heating operation.
INDICATOR ON DISPLAY PANEL
MODE DISPLAY: Display the current selected mode. Including AUTO, COOL, DRY,
HEAT (Cooling & Heating models only) and FAN.
TRANSMISSION Indicator: This transmission indicator will light when remote control
transmits signals to the indoor unit.
TEMP. / TIMER DISPLAY Indicator: The temperature setting (from 17ºC to 30ºC)
or timer setting (0-24h) will be displayed. If FAN mode is selected, there will be no
display.
LED DISPLAY Button: Press this button to clean the display the indoor unit, press it
again to light the display.
The unit system will automatically revert back to the prevoius setting after continue
operating under powerful cooling mode for about half an hour.
Buttons design might be sligthly different from the actual one you purchased depending
on individual models.
All the functions described are accomplshed by the indoor unit. If the indoor unit has
no this feature, there is no corresponding operation happeded when press the relative
button on the remote control.
NOTE
NOTE
Summary of Contents for EPTL
Page 16: ......
