17
you keep the anemometer sensor nearby (although preferably not closer than
5 ft. or 1.53m from the display console). This will make any troubleshooting
and adjustments easier and avoids any distance or interference related issues
from the setup.
After setup is complete and everything is working, return here for outdoor
mounting. If issues show up after outdoor mounting they are almost
certainly related to distance, obstacles etc.
4.2.5.2 Mounting
You can attach a pole to a permanent structure and then attach the sensor
package to it (see Figure 12).
The U-Bolts will accommodate a pole diameter of 1-2 inches (pole not
included).
Figure 12: Sensor package mounting diagram
Make sure the mounting pole is vertical, or very close to it. Use a level if
needed.
Finally, place the sensor package on top of the prepared mounting pipe. The
U-Bolts should be loose enough to allow this but loosen the nuts as
