7 |
P a g e
Installation of water supply pipe
Step-1: Left side connecter
Install the 3-way connecter onto the angle valve, and
then connect the large hole of water supply pipe and
water pipe of toilet pipe to the 3-way connecter.
After that, connect the short hole of water supply
pipe to the water input connecter.
Step-2: Bottom side connecter
If the toilet has two holes; for power line and
water supply, let two supplies across the hole to
plug in device’s connector which is under the
main unit, then insert the main unit to the base
plate.
Note: when you are installing the water supply pipe, please do not bend or break the pipe which may
cause pipe to leak.
Checklist and trial run
Water-supply verification
•
Install the 3-way connecter onto the angle valve, and then
connect the large hole of water supply pipe and water
pipe of toilet pipe to the 3-way connecter.
•
After that, connect the short hole of water supply pipe to
the water input connecter.
