39
– makes it possible for you to view the identified peaks.
If the number of identified radionuclides is too big to be displayed at
the same time in the field, move the device’s joystick down as many
times as needed to go down the list and view them (Fig. 15). Peaks
are displayed in the following format:
ITEM NO.
ENERGY keV RADIONUCLIDE NAME
Figure 15 – Viewing identified peaks
– exits the expert mode and goes to the identification
screen (Fig. 9).
Notice!
Exiting the expert mode does not finish the process of
radionuclides identification. To stop the identification process, wait
for the auto completion or select "
Stop ID
".
2.3.3.6.4 Viewing saved spectra
You can view spectra saved in the device’s memory by switching
to the
"Saved spectra"
item in the mode of radionuclides
identification (2.3.3.5).
The following window opens: