Ecotechnics ECK FLAG Instruction Manual Download Page 54

Page: 54 / 102

INSTRUCTIONS MANUAL

-55-

The nitrogen will be injected into the A/C system, the test will start as soon as the pressure is
stable:

If leaks are detected, the machine will give an alarm signal, discharge the nitrogen from the
system, and display a SYSTEM LEAKS alarm warning. If the test detects no leaks, the
machine will discharge the nitrogen:

Close external bottle and press

to continue

then the machine will sound and alarm and the following screen will be displayed:

Disconnect coupling, then press

the following screen will be displayed:

N2 test in progress

DD/MM/YY XX:XX PM

MANUAL / / NITROGEN TEST (N2)

N2 pressure

9.7 bar

05:41

Close external bottle and press to continue

DD/MM/YY XX:XX PM

MANUAL / / NITROGEN TEST (N2)

N2 discharge

DD/MM/YY XX:XX PM

MANUAL / / NITROGEN TEST (N2)

Disconnect N2 bottle and press to continue

DD/MM/YY XX:XX PM

MANUAL / / NITROGEN TEST (N2)

Summary of Contents for ECK FLAG







































































































Search results

Summary of Contents for ECK FLAG

Reviews:

Related manuals for ECK FLAG

Brands by name

Popular brands

Ecotechnics ECK FLAG, Instruction Manual

Search results

Summary of Contents for ECK FLAG

Reviews:

Related manuals for ECK FLAG

Brands by name

Popular brands