DCS 60
Traction
Figure 6
-
2: cutting heights
Stable speed 1.6
km/h
MC 60
Loosen the 4 screws with a 13 spanner and push
the slide onward, placing it into one of the 3 levels
(See Figure 3.4: MC 60 Details)
Stable speed 1.6
km/h
TRL 60
Loosen the 2 knobs and push the slide downward if
you intend to increase the cutting height, lift the
slide upwards if you want to decrease it, then
tighten the 2 knobs firmly.
TRT 60 –
TRT 60 Pro
Loosen the 2 knobs and push the slide downward if
you intend to increase the cutting height, lift the
slide upwards if you want to decrease it, then
tighten the 2 knobs firmly.
Speed: 1,5 – 1,9 – 3
Km/h
Table 6-1: Adjustments
6.1.1
TRT 60 Pro adjustments
Handlebar height
Handlebar lateral positions
Operate on the lever no. 1 to position the
handlebar in one of the 5 preset level.
Operate on the lever no. 2 to position the handlebar
in one of the 5 preset level.
