20
Firex 600 does not require special maintenance, it only has to be dusted with a brush to remove the ash
that is deposited during combustion.
Abrasive sponges to clean the most resistant waste should not be used as they could compromise the
thickness of the FIREX600 panel, creating critical points of breakage.
The tube of the vacuum cleaner should not be used in direct contact with FIREX 600.
Wet cloths should not be used to clean FIREX 600.
FIREX 600 is resistant to heat but not to knocks; handle with care if moved.
FIREX 600 may show a slight abrasion after a few hours of functioning, this is perfectly normal as the
flame creates microgrooves in the panel without compromising it. The duration of FIREX 600 depends
only on how maintenance is carried out.
The pellet stove is a generator of heat with a solid fuel and as such requires servicing by qualified
personnel at least once a year at the start of the season. This maintenance has the purpose of
ascertaining and ensuring the efficiency and safety of all the components.
We recommend you draw up an annual contract for maintenance of the product with your
installer/dealer.
4.4
Cleaning the combustion chamber
The stove requires simple but frequent cleaning to guarantee an efficient yield and correct functioning.
Therefore, clean the combustion chamber every day using a drum-type vacuum cleaner, making sure
that the ashes are cold first.
4.5
Cleaning the Flue
The flue will require cleaning only once each winter providing that the correct fuel is used. You should
arrange for this when booking your annual service with your local Nature’s Flame service agent. Use
a drum type vacuum cleaner only.
