Ecotap DC 30, Manual, Page: 22 / 40

22
Figure 4
19.4 Insert the cable and attach the strain relief
Insert the power cable at the
bottom and tighten the cable gland.
Attach the cable to the provided
strain relief bracket inside the
charger.
Connect the cable wires to the
terminals of the main switch
(max. 5Nm).
20. MAINTENANCE
Always disconnect the charging station from the power supply
and read the manual before performing maintenance or fixing
a malfunction.
Only products approved by the supplier can be used to repair or replace
components. Repairs and replacements should always be carried out by a
certified specialist.
Maintenance should always comply with and be carried out in accordance
with NEN3140 and NEN50110 low voltage EU regulations.
Check the charging station for leaks.
Check the connection of the main power cable and ensure a tight
ENGLISH ENGLISH