Ecotap DC 30, Manual, Page: 21 / 40

21
19.2 Wall mounting
When the charger is mounted on a wall, the black mounting frame must be
mounted to the wall first, using the supplied bolts, before hanging and fixing
the charger to the mounting frame.
The perfect height of the charger is between 75cm and 95cm measured
from the bottom of the charger. (such that the cable holder is located at a
height between 95cm and 115 cm)
Preferably the charger is not placed in a location in direct sun light.
19.3 Mounting on a frame
Installation of the foundation frame requires a hole of about L400 x W250 x
D700 mm.
The power cable can be guided through the lower opening to the upper
opening.
The (black) mounting frame must be removed first. This frame is not needed
when the station is mounted on the frame. The bolts for the black mounting
frame can be used to mount the charger on the frame.
See figures 2, 3, and 4.
Figure 2
Figure 3
ENGLISHENGLISH