9
Wall Mounting Instructions
These instructions apply to wall mounting only. Turn to page 10 for ceiling
mounting instructions.
If the device is being fitted in a bathroom, the unit must not be plugged in. The
plug should be removed and the unit hardwired into a fused spur. This is a job for
a qualified electrician.
1.
Choose the mounting position, respecting the
minimum distances from surrounding walls, ceilings
or fixed objects listed in the table opposite.
Minimum distances must be observed. Mounting
closer than recommended creates a fire risk.
2.
Stick the drilling template on the wall. Drill the holes
with an 8mm rotary bit.
3.
Push the wall plugs (C) into the holes. Insert the screws (B) into the wall plugs.
The screws should protrude approx. 5mm from the plugs.
4.
Hang the heating panel on the screws.
5.
Slide the panel across so that the screws lock into their correct position in the
bracket, as pictured below:
Minimum distances
Front
300mm
Left
100mm
Right
100mm
Top
500mm