Ecostrad F0606 Instruction Manual Download Page 4

 

 1 | About the Device 

 
The device is designed to provide an efficient, comfortable, and healthy heating 
system for domestic or commercial properties.  

Infrared heating panels can reduce air circulation and help to maintain a clean, 
silent, dust free environment.  

Infrared panels are designed for indoor environments with normal heating 
requirements. They are ideal for homes, schools, hospitals and offices. They should 
not be used outdoors or in large internal spaces such as workshops or warehouses.  

The Ecostrad infrared panel range is available in a wide range of sizes and styles.  

 

2 | Warnings & Precautions  

 
Read this manual carefully before using or installing the device. Always store the 
manual in the immediate vicinity of the device or its site of use. 

Read all safety warnings and all instructions. 

Failure to follow the warnings and instructions may result in electric shock, fire, 
serious injury, or all of the above. Save all warnings and instructions for future 
reference.  

 

Warning

 

Do not ceiling mount panels designed for wall mounting only. 
Use of panels in unspecified locations can cause panels to overheat and 
poses a fire risk. 

 

Warning

 

This appliance can be used by children aged from 8 years and above and 
persons with reduced physical, sensory or mental capabilities or lack of 
experience and knowledge if they have been given supervision or instruction 
concerning the use of the appliance in a safe way and understand the 
hazards involved. Children shall not play with the appliance. Cleaning and 
user maintenance shall not be made by children without supervision. 

 

 

Warning

 

Children of less than 3 years should be kept away unless continuously 
supervised. Children aged from 3 years and less than 8 years shall only 
switch on/off the appliance provided that it has been placed or installed in 

Summary of Contents for F0606


















Reviews: