EcoSolar Energy Conscious Design Limited
31
Solar collector mounting
The collector fixings shall be mad in accordance with the NZBC, G12, AS2 or shall be specifically
designed by a structural engineer. The details below are generic, however specific design is required
in high / extreme wind zone areas, such as above a height of 8m above ground level.
Corrugated / Iron sheet roofing
Attach collector to roof inclination
There are several methods of installing the collectors flat on to an iron roof, Figure 14 shows the
EcoSolar aluminium profile system. Short lengths of aluminium angle are used to bolt into the roof
and the aluminium profile to maintain a separation between the collector and the roof.
