27 of 42
Learning to ride the X62
X
62
11.
Learning to ride the X62
11.1 Going forward and backward
a.
Having fully charged the vehicle, unplug the X62 from the mains
b.
Turn on the power switch on the body of the X62, and you will hear an audible welcome to start
using the smart scooter – the light on the Signal Indicator will come on, which means the vehicle
has started normally
c.
BEFORE YOU STEP ONTO THE MACHINE, make sure that the pedals are on the horizontal level
d.
Standing directly behind the X62, hold the handlebar grip with one or two hands, and keeping the
leansteer bar upright, adjust the handlebar grip until the pedals
become horizontal – then step onto the machine with one foot
e.
Place your centre of gravity on the pedal gradually, and raise the
other foot (similar to walking upstairs)
f.
Avoid moving the leansteer bar
WARNING
: Beginners should not dismiss these early steps, and learn to master them
to prevent any injury or accident
Summary of Contents for X62
