Fault
Cause
Solution
Unit was unplugged before purging
was complete.
- No power to machine.
- Unit not switched on.
- The set humidity level has been
reached.
The drain hose is loose. Not correct
connected.
- Room temperature is too low.
- The doors and windows are open.
- The unit has not been used long
enough.
- The air filter, coils are dirty.
Water drips out when moving the
unit.
Unit does not operate.
Water on the floor.
Unit collect too little water.
Purge unit before moving.
- Plug in unit. Check power at outlet
and base of unit.
- Switch on the unit.
- Choose CO (continuous) if you still
want to dehumidifying after the set
value has been reached.
=Tighten the connection of the drain
hose.
- Increase the room temperature.
- Close all doors and windows.
- Allow the unit to run more time.
- Check the filter and coils and clean.
TROUBLE SHOOTING
en
16
Summary of Contents for EPD330LGR
Page 86: ...86 86 86 ...
Page 87: ...87 ...