Ecoplus Pi3900 EP-1000-TAC, Owner'S Manual & Installation Manual, Page: 13 / 33

13
Step 5. – Attach Housing Cap to Wall
Attach the cartridge filter housing cap and mounting bracket to your wall using the
remaining four (4) lag bolts and washers as shown below. The top of the mounting
bracket should be mounted EXACTLY 62 ¾ (62.75) inches off the floor. Use a carpenter’s
level to ensure that the bracket is mounted level to the floor. You will need to ensure that
there is adequate space on either side of the bracket to accommodate the system. You will
need approximately 9 to 12 inches on the left and 24 to 30 inches on the right.
Go to next page.