5
Manual for CON1
4.2 Start Screen
The main screen appears approximately five seconds after connection of the power supply. The hard-
and software version of the device are displayed, additionally, in background, the stored data is
loaded. Then the calibration of the buttons takes place.
4.3 Status Screen
The main screen displays the actual status of the lighting and the time.
After about one minute the display is turned off, when pressing the enter button (middle button) the
display is again available for a minute.
When pressing the enter button (middle button) when the display is active, the main menu appears.
4.4 Main Menu
From the main menu one can access, by pressing the navigation buttons, the following menu points:
Output Menu 1-3
System Time
System
4.5 Outout Menu
The output menu includes the following menu points:
Connected product
Sunrise
Sun
Sunset
Moon
Output Menu – Connected product
In this menu you can chose the connected product. The outputs are allocated as follows: (please see
here picture on page 1, connectors and panels):
Left
- Output 1
Middle - Output 2
Right - Output 3
