36
37
TROUBLESHOOTING
Although the vehicles receive a thorough
inspection before shipment from the fac-
tory, trouble may occur during operation.
However, should your vehicle require any
repair, take it to a dealer, whose skilled
technicians have the necessary tools,
experience, and knowhow to service the
vehicle properly.
Use only genuine replacement parts. Imi-
tation parts may look like genuine parts,
but they are often inferior have a shorter
service life and can lead to expensive
repair bills.
CLEAN AND STORAGE
CLEAN THE VEHICLE
Clean of the vehicle in proper and suitable
way will make it attractive, extend it’s lfe
and optimize the performance.
Before cleaning
Close every caps, covers and electrical
connectors to prevent them of getting wet
while cleaning.
• Do not use acid-based cleaners. If such
funds used for stubborn stains, so use this
only occasionally, dry it immediately after
and then apply a corrosion protection
spray.
• Always follow the manufacturer‘s instruc-
tions on care and cleaning agents.
• Use best only water and mild detergent
or special cleaner from the dealer to the
sensitive components of the vehicle to
prevent damage. Dry the plastic parts then
wipe with a soft, dry cloth or sponge.
• Protect particularly plastic parts, paint,
headlight glass from harsh chemicals such
as fuel, rust remover, brake cleaner or
similar. The use of such agents may result
in malfunction, damage and affect the
security itself.
• Do not use a high pressure washer or
steam cleaner, causing water in storage
can penetrate electrical components such
as connectors or switches, lighting, brake
shoes and brake linings or damage, seals,
paint and other surfaces.
Cleaning after normal use
Remove dirt with warm water, a mild de-
tergent, and a soft, clean sponge, and then
rinse thoroughly with clean water. Use a
brush for hard-to-reach areas.
Cleaning after riding in the rain, near the
sea or on salt-sprayed roads
Since sea salt or salt sprayed on the roads
during winter are extremely corrosive in
combination with water, carry out the
following steps after each ride.
• Clean the vehicle with water and a mild
detergent.
• Do not use hot water, which increases the
corrosive effect of the salt.
• Apply a corrosion protection spray on all
metal, including chrome- and nickel-pla-
ted, surfaces to prevent corrosion.
After cleaning
• Dry the vehicle.
• To prevent rust, we recommend appro-
priate care to use according to manufactu-
rer‘s instructions.
• Wax all painted surfaces.
WARNING
• Make sure that there is no oil or wax on
the brakes or tires.
• If necessary, clean the brake discs and
brake linings with a regular brake disc cle-
aner and wash the tires with warm water
and a mild detergent.
• Before operating the vehicle, test the
braking performance and tires.
STORAGE
Short-term (for a few days)
• Always store your vehicle in a cool, dry
place and, if necessary, protect it against
dust with a vehicle cover.
WARNING
Please store the vehicle in a well air flow
room with dry air if possible. A place with
wet humidity will cause rust.
Long-term (for weeks)
• Clean the vehicle.
• Check and correct tire pressure and lift
the vehicle off the ground, so that neither
of the two wheels is on the ground. If this
is not possible, turn the wheels every
month a little further, so they do not
constantly the same place standing (Stand
damage).
• If you are not using the vehicle for an
extended period of time, set the circuit
breaker to „OFF“. During this time, the
battery has to be charged according to the
manual.
