Section 1
INTRODUCTION
1.1 Introduction
The ECOM J2KN is a portable, microprocessor controlled, electrochemical sensor based emission-
analyzer that incorporates proven technology for accurate exhaust gas analysis. The ECOM J2KN
can be fitted with up to 5 separate gas sensors.
The ECOM J2KN is suited for a variety of applications: Boiler/Burner Flue Gas Analysis; Engine
Emissions Analysis; Pollution Source Testing; and Environmental Reporting of Stack Gas
Parameters, among others. It provides measurements for O
2
, CO (low range 0-4,000 ppm), and / or
CO (high range 0-40,000 ppm), NO, NO
2
, (NOx), SO
2,
and Combustibles. It also measures Gas and
Ambient Temperatures, Stack Draft (pressure) and will perform a standardized smoke test. The
calculated parameters include CO
2
, Combustion Efficiency, Excess Air, and Losses. An on-board
printer allows hard copy printing of vital stack parameters. Datalogging is available via on-board
memory card and real time data transmission to a PC via wireless interface device.
1.2
Analyzer & Accessories
The ECOM J2KN is a portable gas analyzer that enables qualified personnel to collect accurate
emissions data for a variety of purposes, i.e. the servicing and maintenance of combustion sources
and environmental compliance. Designed as a portable analyzer for semi-continuous operation only,
the ECOM J2KN is not recommended for continuous gas emission measurement. Upon receipt of
your instrument, you should find the following components and accessory items contained within the
carry case:
ECOM J2KN analyzer, with wireless remote control.
Electronic Peltier-type gas cooler / water trap assembly, attached.
15 ft. Standard sample line.
13” Coaxial probe assembly with connections for draft, gas, temperature gas, and slot for smoke
test filter (other probe lengths available upon request)
Magnetic holster for the Remote Control
2 NOx / SO2 Filter Cartridges (p/n 79275)
2 rolls of printer paper (p/n 79285)
100 smoke paper test discs (p/n 71283)
1 package of 10 water trap filters (p/n 75316)
2 Round in-line filter (p/n 71185)
8 ft. AC power cord
Air thermocouple with 6’ cable (T-AIR connector fitted with wireless plug)
2 keys for case latches
Carry
strap
User
manual
Available Options
Heated sample line with probe. Custom lengths available.
SDMM Card & Card Reader – for on board datalogging
Advanced DAS software with Wireless Data Interface Box
