Ecom Ident-Ex 01, Operating Instructions Manual

Page: 23 / 28

23
Note:
Difference to Bluetooth test mode from chapter Bluetooth Testmode and Conti-
nuous Read from chapter 6:
• No read data will be sent via Bluetooth to a connected device (see chapter
Reading with a Head Module)
• No version information (see chapter Version Output) will be sent via Bluetooth
to a connected device
• No Bluetooth connection can be erased by pressing the SPP button (see chap-
ter Erase a Bluetooth Connection)
In order to leave this mode you must power off the Ident-Ex (Press and hold the
Power button until the Power LED is off).
16. Charging
The Ident-Ex 01 must be charged at regular intervals. Independent of the moun-
ted head module, the Ident-Ex 01 must be charged every 6 months at least once
50 percent.
When you connect a discharged Ident-Ex 01, it can take several minutes until the
charging function is visualized. Insert the charger plug into a power outlet. The
charging port is located at the end of the handle. Insert the charging plug to the
charging port. The LEDs indicate the charging status as described in chapter
Battery indicator of the Ident-Ex .
17. NFC and Bluetooth pairing
The Ident-Ex 01 can be connected to any input device in two ways, via Bluetooth-
or NFC pairing.
Please keep in mind, because of the different firmware levels in the input
devices, the appearance of the Soft keyboard may be different. In addition to the
Ident-Ex 01 please install the CamScanKeyboard App and enable the setting
“Show soft keyboard always”. The CamScanKeyboard App can be downloaded on
https://www.ecom-ex.com/nc/apps/ .