Ecolab FAS1543 User Manual Download Page 19

Patient Safeguard System Installation Tool Directions for Use                                                          Ecolab, Inc. 

Page 17 

Appendix B - Warranty 

This device is warranted against defective materials and workmanship for two years from the date of purchase.

 

Equipment  covered  by  this  warranty  will  be  repaired  or  replaced  in  the  United  States  and  Canada,  WITHOUT 
CHARGE, except for shipping and handling, by our Factory Service Center. 

When  returning  equipment  for  warranty  service,  you  must  first  call  your  distributor’s

 

Warranty

 

Service 

Department

 for your Return Merchandise Authorization Number (RMA).  The RMA must be on your return label 

and the shipping charges must be pre-paid and a copy of your receipt must be enclosed.  Equipment should be 
returned to Ecolab Customer Service, 1201 Jupiter Park Drive, Jupiter, FL 33458. 

This warranty covers all defects incurred from normal use of the equipment and  does not  apply  in the following 
cases: 

a.  Loss or damage to the equipment due to abuse, mishandling, accident or failure to follow installation or 

use instructions. 

 

b.  If the equipment is defective as a result of leaking batteries. 

 

c.  If the equipment has been serviced or modified by someone other than our authorized agents. 

 

 THE  AFOREMENTIONED  IS  IN  LIEU  OF  ALL  WARRANTIES,  EXPRESSED  OR  IMPLIED,  INCLUDING  BUT 
NOT  LIMITED  TO,  ANY  WARRANTY  OF  MERCHANTABILITY  OR  OF  FITNESS  FOR  ANY  PARTICULAR 
PURPOSE.   IN  NO  EVENT  SHALL  THE  VENDOR  BE  LIABLE  FOR  CONSEQUENTIAL,  INCIDENTAL, 
INDIRECT OR SPECIAL DAMAGES OR LIABILITY, TRANSPORTATION, INSTALLATION OR SUBSTITUTION 
COSTS,  DELAYS,  OR  FOR  ANY  OTHER  DAMAGES,  COSTS,  OR  EXPENSES  INCURRED,  IRRESPECTIVE 
OF HOW THEY OCCUR.  THIS WARRANTY SHALL NOT EXTEND TO ANY OTHER PERSON OTHER THAN 
THE ORIGINAL PUCHASER OF THIS EQUIPMENT OR THE PERSON FOR WHOM IT WAS PURCHASED AS 
A GIFT. 

This warranty gives  you specific legal rights, and  you  may  also have other rights, which may  vary from state to 
state.  This warranty is given with respect to equipment purchased in the United States. 

 

Summary of Contents for FAS1543




















Reviews: