FOOD SAFETY SPECIALTIES INC.
How to assemble your DuraLoc cleaning tools
DuraLoc Dual Cavity Mop Bucket Assembly Instructions
DuraLoc
™
Tool Assembly Instructions
© 2016 Ecolab USA Inc.
For assistance contact customer support - 877.603.1187
1
4
1
2
5
2
3
6
3
To secure DuraLoc Dual Cavity Casters
onto bucket, flip DuraLoc Dual Cavity Mop
Bucket upside down. Place casters in the
holes and tap or push until they snap into
position.
Secure the DuraLoc Dual Cavity Mop
Bucket Wringer handle with the enclosed
screw and fastener. Place the angled
portion of the handle facing inward. Insert
the screw so that the nut is facing away
from the mop bucket wringer pocket.
Handle can be assembled to accommodate
left- or right-handed employees.
Attach the Universal Insert Holder onto the
Handle by aligning the grooves with the
slots. Twist the large connector to
secure.
Place the gray removable insert bucket
into the back of the dual cavity bucket.
Place the removable wet floor sign
handle hanger on the back of the
gray portion of the wringer.
Slide the Squeegee, Mop, or Broom into
the holder until it snaps into place.
Place the DuraLoc Mop Bucket Wringer on
top of the gray removable insert bucket.
Attach the DuraLoc Mop Clip on the front
of the Mop Bucket Wringer with the two
remaining screws. Do not over tighten
screws.
Press the Ecolab lever and slide Squeegee,
Mop or Broom out to remove.
Moss Foam Squeegee, Rubber Squeegee, Angle Broom
and Mop Assembly Instructions
