FOOD SAFETY SPECIALTIES INC.
FOOD SAFETY SPECIALTIES INC.
How to assemble your DuraLoc cleaning tools
Big Dipper Deck Brush Assembly Instructions
DuraLoc Tool Assembly Instructions
© 2016 Ecolab USA Inc.
For assistance contact customer support - 877.603.1187
1
1
1
2
2
2
3
3
3
Snap the plastic DuraLoc Big Dipper
insert onto the DuraLoc Universal
Insert Holder.
Insert the DuraLoc Mop Brush onto the
Universal Insert Holder by lining up the
circle and the 2 holes. Attach the
Universal Insert Holder to the DuraLoc
Light Weight Handle by placing the end
of the handle on the ground and assemble
at eye level.
Store tools properly in Dura Loc Storage
Hanger to ensure that Tool Heads do not
touch floor when stored
Place the end of the DuraLoc
Over-Mold Handle on the ground and
assemble at eye level. Line up grooves
inside the Deck Brush Assembly with
the Dura Loc Over-Mold Handle.
Line up grooves inside the Universal
Insert Handle with the Universal Handle
and twist the connection to secure.
Rinse Mops, Squeegees and Deck
Brushes after every use
Twist the large connector to secure.
Slide the mop head over the razor-style
holder until the mop snaps into place.
Discard and replace Tool Heads when worn
Mop Brush Attachment Assembly Instructions
Dura Loc Care Instructions
Following these basic instructions will maximize the life of your Tool
