42
Save calibrated value
2.7 Submenu #7.0 View System Info
This sub-menu offers extended information logged for the entire system, and can be broken down by each system
component for each washer. It will also include software revision information for each of the connected modules (MSI, FS,
IO, Condor controller), Load Count histories/Time & Date stamping, and clearing options (i.e. error logs, and load counts).
Program Menu
1. Account Menu
2. Quick Setup
3. System Menu
4. Formula Menu
5. Prime Pump
6. Calibration
7. View System Info
8. Diagnostics
7. V
IEW
S
YSTEM
I
NFO
When an Ecolab tablet or mobile device is connected to the Condor controller, the software revision of each connected
module will be compared to the latest software releases from the Ecolab design team. A flag will be raised and
confirmation of a software update process will be displayed on the Tablet (if necessary).
2.7.1.
Submenu #7.1 View System Info>Last Visit
System Info #7.0
1. L
AST
V
ISIT
2. Load Counts
3. Empty Alarm
4. Formula Not Finished
5. System Error
6. Condor Software
7. OPL Software
8. IO Software
9. WE Signal Software
10. Formula Select Software
11. Water Temperature
1. L
AST
V
ISIT
System Info
>Last Visit #7.1
MM-DD-YYYY
Screen #7.1 displays the date from the last visit. A visit is logged when the password protected menu is accessed or
the Condor Controller is connected to an Ecolab tablet or mobile device.
Press <Back> to return to the previous screen.