5
When room temperature falls below 20
℃
, the fan will stop running and the "Smart"
icon in the display area will keep flashing, once room temperature reaches or
surpasses 20
℃
, the fan will automatically resume running.
CAUTION: These are features designed for your comfort. They are not a
malfunction.
-OSC key
Press this key to oscillate the fan left and right and corresponding indication is
showed on the control panel . To stop the fan from oscillating in the position
desired , press this key again.
-TIMER key
Press this key repeatedly to set the fan to automatically shut off after a selected
number of hours in the sequence of "1-2-4-8." Don't press this key if you want the
fan to run continuously.
After the timer is set, the timer display will indicate in how many hours the fan will
shut off, in the sequence of "8-4-2-1." For example, if you set timer for eight hours,
after one hour, the display will still indicate "8h," however, after four hours, the
display will change to "4h," etc.
II. Remote Control (Fig. 9)
Keys such as Power ( ), Wind Speed ( ), Wind MODE ( ), OSC ( ), and
TIMER ( ) on the remote control have the same functions as
corresponding keys on the unit.
1. Remote Control Operation
(1) Point the remote control at the control panel and press the
desired key.
(2) Make sure that align the emitter at the front of the remote
control with the receiving window
(3) Avoid direct sunshine onto the control panel. This may affect
how well the remote control works.
2. Batteries
(1) Slide off the battery compartment cover located at the back of the remote.
(2) Insert the batteries, and make sure the batteries are placed as shown in
Fig.10
.
(3) Slide back the battery cover.
NOTE: Use only size “1.5V AAA” manganese or alkaline batteries (NOT INCLUDED).
Do not use rechargeable batteries.
Caution: Your fan has a Safety Touch Stop Sensor function. This feature is
designed to protect children.When the fan stops, it means the guard was
touched. This is a protection feature of the unit, not a malfunction.
Fig. 9
