ECOFOREST Vap 100, Installation And Maintenance Manual

Page: 33 / 140

32
1. VAP100 TECHNICAL FEATURES.
CONNECTIONS

Heating return - Male thread. “ / DN 2 / DN50

Heat flow – Male thread. “ / DN 2 / DN50

Charge – Discharge – thread female “ / DN 3/4 / DN20

Safety valve discharge – thread female “ / DN 3/4 / DN20

Gas output mm 200

External silo connection. mm 50
AIR ADMISSION

Maximum air flow admission (Estimation according to mass flow and gas
temperature in nominal power).
m
3
/h Regulation

Minimum draught recommended
mBar Pa Regulation
HYDRAULIC

Expansion vessel L

Maximum working pressure. Bar / KPa 2,5 / 250

Minimum working pressure.
Bar / KPa 0,5 / 50

Recommended working pressure. Bar / KPa 1,2 / 120

Calibrated safety valves. Bar / KPa 3,0 / 300

Water volume inside boiler
L 365

Head loss on water side
dt=10 K mBar 418
dt=20 K mBar 315
GENERAL FEATURES

Weight kg 1360

Auxiliary Hopper (Fuel estimate ρ
ap
≈630 kg/m
3
)
kg 50

Hopper volume. L

Weight of the turbulator cylinder, Stage 1 kg/ud 1,7

Weight of the turbulator cylinder, Stage 2
kg/ud 2,3

Weight of the cyl positioner set. (14+14) Kg 4

Weight of the helix turbulator Stage 1 kg/ud

Weight of the helix turbulator Stage 2 kg/ud

Weight of the helical c positioner set
kg/ud

Volume of the ash box L 45

Airborne noise according to the UNE EN 15036-1
dB 65
SILO CONDITIONS.

Maximum hose length *. m 5

Maximum height allowed.
m 4

Minimum curve radius. m 1
Each curve is equivalent to 1m, so if we have 2 curves the maximum length would be 5m.