Control applications manual
pGD1 control terminal
28
EN
4.3.
Adjusting on-screen parameters
Take the following steps to change a parameter:
1.
Search for the screen containing the parameter that needs to be changed.
2.
With the cursor in position 1 press on to enter the screen and move the cursor to the parameter in position 2.
3.
Adjust the parameter in position 2 with buttons
.
4.
Press to accept and move the cursor to position 3.
5.
Adjust the parameter in position 3 with buttons
.
6.
Press to accept and move the cursor to position 4.
7.
Adjust the parameter in position 4 with buttons
.
8.
Press to accept and return to position 1.
9.
With the cursor in position 1 again, press buttons
to go to the previous or next screen, or to return to the list of
user menus.
Figure 4.1.
Parameter adjustment.
Position 2
Position 3
Position 1
Position 4
