ecoSMART e-source
user, installer and technical service manual
5
EN
1.
General information
Thank you for purchasing an ecoSMART e-source source manager with your ecoGEO HP heat pump.
This manual contains information about installing, commissioning and troubleshooting the device. There is also useful information
for the end user, such how to navigate and adjust parameters via the control panel.
To ensure optimal performance of the e-source manager, read this manual carefully before installation and commissioning. Keep
this manual handy for future reference.
This manual contains two different kinds of warnings that should be heeded.
NOTE
Indicates a situation that may cause material damage or equipment malfunction. This may also be
used to indicate practices that are recommended or not recommended for the equipment.
DANGER!
Warning of imminent or potential danger which, if not avoided, may result in injury or even death.
This may also be used to warn of unsafe practices.
The e-source manager has been designed to work together with an ecoGEO HP heat pump or together with a cascade of several
ecoGEO HP heat pumps controlled by a supervisor module.
The manufacturer is not responsible for any material damage and/or personal injury resulting from improper use or incorrect
installation of the equipment.
The device must be installed by a licensed installer in accordance with applicable local regulations and in accordance with the
instructions described in the installation manual.
1.1.
Safety considerations
The detailed instructions in this section cover important safety aspects and must therefore be strictly complied with.
DANGER!
All the installation and maintenance work described in this manual must be performed by an
authorised engineer.
Improper installation or use of the equipment could cause electrocution, short circuits, leakage of
working fluids, fire or other personal injuries and/or material damage.
If you are unsure of the procedures for installation, maintenance or use of the equipment, contact
your local dealer or technical support for advice.
If you detect a malfunction in the unit, contact your local dealer or technical support to answer any
questions.
This equipment should not be handled by people with physical, sensory or psychological disabilities,
children and people with no suitable experience or knowledge, unless it is under the supervision or
direction of a person responsible for their safety.
When carrying out installation, maintenance or commissioning of the heat pump, always use
appropriate personal protective equipment.
Keep the plastic bags included in the packaging out of the reach of children, as improper use could
result in injury caused by asphyxia.
