ecoSMART e-source
user, installer and technical service manual
23
EN
5.10.
ALARMS Menu
Press
for quick access to the information menu from the main screen.
Active alarms
These screens display the alarms that are or have been active. The
button lights up and
remains on if there is an active alarm locking the system. It also flashes if there is any kind
of active alarm that does not lock the system or if the system has recovered after any kind
of alarm.
Reset alarms
Once the problem that caused the alarm has been resolved, the alarm can be reset on this
screen. The
button will switch off.
6.
Controller installer menu guide
To access the installer menu, press
at the same time. Afterwards, enter access password PW1. This menu is used to define
the type of installation and the services the heat pump will deal with, to adjust the various operation parameters and protections
as well as to carry out various start-up and maintenance operations.
This menu shows the sub-menu structure of the INSTALLER menu.
INSTALLER menu
Sub-menu level 1
Sub-menu level 2
Sub-menu level 3
a.
Language
b.
Configuration
b.a.
Source management
b.b.
Source configuration
b.b.1.
Source 1
b.b.2.
Source 2
b.b.3.
Source 3
b.b.4.
Source 4
b.c.
Remote control
b.d.
Protections
b.e.
Probe Conf.
c.
Information
d.
Manual activation
e.
Default values
f.
Change password
Table 6.1.
INSTALLER menu structure.
