8.0 INSTALLATION WALL MOUNTED - CONTINUED
GB IE
6
©
2016 Focal Point Fires plc.
3. Find the optimal place to mount your wall-mounted Fire. Consider the proper position relative to your room, placement
of furniture and windows.
4. Hold the mounting bracket up to the wall to verify the correct location and ensure that the mounting bracket is level. Use
a pencil to mark the four mounting holes on the wall at the desired mounting location, using the mounting bracket as a
template.
5. With an electric drill (not included) on its low setting, drill 5/16 inch diameter holes to at least 1½ inch deep on the
marked points. NOTE: If installing the mounting bracket to a wall stud, there is no need to drill the holes in the wood and
no need for the plastic wall anchors. It is recommended to install the mounting bracket to at least one wooden stud.
6. Tap 4 large wall anchors (2) into the pre-drilled holes with a hammer until they are flush with the wall.
7. Secure the mounting bracket (3) to the wall by using four M5 x 50 mm screws (3). As shown.
