11
©
2016 Focal Point Fires plc.
Remote Control
The fire is supplied with an IR multifunction remote.
Before the remote will operate the plastic insulating sheet needs
to be removed.
Battery Replacement
Battery Requirements: 3V CR2025
1. Locate and remove the battery bracket.
2. The battery has two sides, one with a button feature, and the
other is flat.
3. Insert the battery with the button side down into the battery
bracket, making sure the battery is firmly seated.
Using The Main Power Button
The main power button (1) is located on the control panel on the right side of the electric fireplace. Pressing the main power button (1)
once turns the power on.
Pressing the main power button (1) again will turn the power off.
If you find that none of the other buttons appear to work, check to make sure that the main power (1) is turned on.
Battery Disposal
Battery must be recycled or disposed of properly. Check with your Local Authority or Retailer for recycling advice in your area.
Using the Flames Control Button
Press the flames control button (2) to turn on the ember bed
and flame effect.
Pressing the flames control button (2) once turns flames on and
lights the ember bed.
Pressing the flames control button (2) again will cycle through
different colours of the ember bed. The colour rotation mode will
cycle through the 3 different colour settings continuously. When
using Remote Control, you need to press the button (2) to enter
the colour rotation mode. Reference the table for more detailed
information.
10.0 OPERATING THE APPLIANCE - CONTINUED
GB IE
Using the Heater Control Button
The heater control button (5) turns the heater on and off. With the unit
ON, press the control panel heater button
(6) for 5 seconds and enter temperature adjustment mode.
Hold button (2) down for ten seconds to change from Fahrenheit to
Celsius.
Press the control panel heater button (6) to change to the desired
temperature. There are 10 temperature settings. Reference the table for
more detailed information.
After the temperature is selected will stay on for 10 seconds, then turn
off.
Adjusting the Ambient Side Lighting
Press the side light control button (4) to turn on the ambient lighting.
To change the colour of the lighting press the side light control button
(4) again. You can control the side lights colour as described in the table.
The colour rotation mode will cycle through the 3 different colour
settings continuously.
