17
exclusion mode, press the button 3 times within
1.5 seconds. The detector will stay “awake” for
10 minutes to allow time for setting and device
status enquiring. Detector beeps when button is
pressed.
3.
To reset the module press button 3 times within
1.5 seconds. Within 1 second, press and hold but-
ton until beep stops. The sensor is excluded and
all the preset values will be reset to factory de-
fault. Detector beeps when button is pressed. A
long beep is sounded for 5 seconds.
Mounting
The device has been designed for residential use. For
a total coverage of the building, you need to place a
device in each room.
The detector is not able to detect the presence of
flames , gas, heat.
1.
Define the number of devices required fort instal
-
lation.
2. Always place the device in the center of the ceiling,
keeping a distance of at least 10 cm from any sur
-
rounding wall.
