Ecodense WT-S DHW 45 H Installation, Operating And Maintenance Manual Download Page 2

 

 

04.12.2020 Rev. 00 

 
 
DEAR USER, 

 

 

The Condensing Boilers ECODENSE WT-S DHW 45 L, ECODENSE WT-S DHW 

45  H,  ECODENSE  WT-S  DHW  45  XH,  ECODENSE  WT-S  DHW  55  L,  ECODENSE 
WT-S  DHW  55  H,  ECODENSE  WT-S  DHW  55  XH,  ECODENSE  WT-S  DHW  65  L, 
ECODENSE  WT-S  DHW  65  H,  ECODENSE  WT-S  DHW  65  XH,  are  constructed  and 
manufactured according to the most advance technological inventions and the safety rules. 
It is easy to use for our customers. 

 

 

We recommend that you read this manual and safety warnings thoroughly before the 

use of the device in order to ensure safe, cost effective and environmental-friendly use. 

 
  
If you encounter any issue that is not explained clearly in this manual or you could 

not understand, please contact with our service department. 

 
 
We thank you for choosing ECODENSE brand. 

 
 

This Operating Manual is an integral part of the device and must be maintained in a 

plastic dossier and hung at a clearly visible place by the device. 

 
 

 
 

 
 
 

 

TERMO ISI S

İ

STEMLER

İ

 SAN.VE T

İ

C.A.

Ş

Esentepe Mah.Milangaz Cad. No:75 K:3 

                                                                                                  

Kartal Monumento Plaza 

                                                                         Kartal/

İ

STANBUL/TÜRK

İ

YE 

Tel: +90 216 442 93 00  

Fax: +90 216 370 45 03 

                                                                                     www.ecodense.com 

      e-mail:[email protected] 

 

Summary of Contents for WT-S DHW 45 H





























Reviews: