Setting up Reminders and Alerts
Your Smart Thermostat can be programmed to remind you
of required filter changes and regular maintenance.
These reminders were configured by the contractor
during installation. Changing them may effect the
operation of your heating and cooling system.
If you are not sure about what equipment you have
installed or whether you need to replace rather than
clean your filters, please contact your heating and
cooling contractor, or consult your original equipment
manuals for the recommended maintenance procedures.
HVAC Maintenance
The Maintenance alert is displayed on the touch screen
when regularly scheduled maintenance is required. It
will also show your contractor’s contact information (if
programmed by the contractor).
Select this item to turn the reminder on or off, show the date
of the last service, and select a reminder interval.
Furnace Filter
This sets the reminder period for cleaning or replacing
the furnace air filter.
Select this item to turn the reminder on or off and set the
reminder interval in run-time hours or calendar months.
You can also check the date of the last filter change.
Humidity Filter (Optional)
This sets the reminder period for cleaning or changing
the humidifier filter.
Note:
If your Smart Thermostat is not connected to a
humidifier or dehumidifier this option will not be displayed.
Select this item to turn the reminder on or off to
choose the reminder interval in run-time hours or
calendar months. You can also check the date of the
last filter change.
UV Lamp
Sets the reminder period for cleaning or replacing the
UV lamp. Select this item to turn the reminder on or off
and to set the reminder in calendar months. You can
also check the date of the last lamp change.
Ventilator Filter (Optional)
Select this item to turn the reminder on or off to choose
the reminder interval in run-time hours or calendar months.
You can also check the date of the last filter change.
Note:
If your Smart Thermostat is not connected to a
ventilator, this option will not be displayed.
Alerts
The Smart Thermostat can generate alerts when the
temperature in the home reaches a pre-programmed
temperature. This protects your home from damage due
to freezing or excessive heat.
If this alert has been set up, you will see the alert on the
Smart Thermostat. If you’ve configured your personal
web portal, you will also get an email alert.
Low Temperature Alert
Select this item to set the temperature at which the
Smart Thermostat will generate a Low Temperature
alert. The range can be adjusted to:
Off – no alert will be generated
Set temperature range of 35° – 68°F (1.5° – 20°C).
High Temperature Alert
Select this item to set the temperature at which the
Smart Thermostat will generate a High Temperature
alert. The range can be adjusted to:
Off – no alert will be generated
Set temperature range of 60° – 104°F (15.5° – 40°C).
Low Humidity Alert
Select this item to set the humidity level at which the
Smart Thermostat will generate a Low Humidity alert.
The range can be adjusted to:
Off – no alert will be generated
Set humidity range of 5 – 95% R.H. in 5% increments
High Humidity Alert
Select this item to set the humidity level at which the
Smart Thermostat will generate a High Humidity alert.
The range can be adjusted to:
Off – no alert will be generated
Set humidity range of 5-95% R.H. in 5% increments
15 Setting up your Smart Thermostat
Setting up your Smart Thermostat
16
To set up Reminders:
From the Home
screen, Press
More.
Press
Settings
and
select
Reminders and
alerts
from the list.
Scroll through options
to set and adjust to
your needs.
