Room Sensor Specifications
Model
No:
EBRSE4-01
FCC
ID:
WR9EBRSE4
IC:
7981A-EBRSE4
Dimensions:
44x44x20 mm without the stand.
53 mm tall when mounted on the stand
Wireless band:
915 MHz
Power source:
CR2032 watch battery
Operating conditions:
Operating Temperature: 0˚C to 40˚C
Operating Humidity:
20% to 80% RH
FCC Compliance Statement
Compliance Notice:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
Change or modifications that are not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
RF Exposure Information:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, human proximity to the antenna shall not be less than 20cm during normal operation.
Industry Canada (IC)
Compliance Notice:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired
operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
RF Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an
uncontrolled environment. This transmitter must be installed to provide a separation distance
of at least
20 cm from all persons and must not be collocated or operating in conjunction with any
other antenna or transmitter.
Warning: Changes or modifications not expressly approved by ecobee Inc. could void the
user’s authority to operate the equipment.
