Eco ETS 64-R Mounting And Operating Instructions Download Page 25

Page: 25 / 112

ETS 64-R

0548-990-61---70g_2019.10.indd



14 Nm

Loctite 243



5 Nm

0548-990/62g

Page 25 of 95

Mounting and operating instructions

4.4.2

Sliding rods RG pulling function / Lintel mounting

Material:

1 Drive mechanism

0548-032

Covering aluminium

Drive mechanism

0548-033

Covering inox

incl. fixing set

0548-107

1 Mounting plate

0548-358

resp. 0548-360 MOD

1 Sliding rods

0548-164/01

650 mm incl. sliding bolts 18/46 mm

Procedure:

1. Mark out and drill the fastening holes on the lintel and the door leaf.

Note:

The illustration shows a 46 mm sliding bolt. Depending on the situation, this bolt can

be replaced by the version 18 mm. This will change the respective dimensions by minus

28 mm

2. Mount the mounting plate.

3. First loosen the screw (G) of the glider (E), then the

bolt (F) of the rotating arm (D).

4. Depending on the situation, select the short 18 mm

or long 46 mm bolt (F) and fasten it to the rotating

arm (D) by means of screw locking adhesive Locti

te 243: Tightening moment

14 Nm

5. Push the glider (E) over the bolt (F) and fasten it by

means of screw (G): Tightening moment

5 Nm

Attention:

When tightening the screw (G), the bolt (F) must not come loose!

Summary of Contents for ETS 64-R

















































































































Search results

Summary of Contents for ETS 64-R

Reviews:

Related manuals for ETS 64-R

Brands by name

Popular brands

Eco ETS 64-R, Mounting And Operating Instructions

Search results

Summary of Contents for ETS 64-R

Reviews:

Related manuals for ETS 64-R

Brands by name

Popular brands