9/11
17
18
19
Carry out a functionality test of hold-open function.
Attach covers and nylon clips .
Adjust and fix covers . Attach covers for drill holes in slide rail .
1
2
1
2
The slide rail with hold-open function is premounted for a door opening angle of 90°. The open angle can be
changed up to 70° by moving the hold open unit in the direction of the door middle. It can also be changed up
to 130° by moving the hold open unit in the direction of the door hinges. This is achieved by opening the door
until the requested opening angle is achieved and fixing it in this position. In order to move the hold open unit,
you have to loosen the fixing screw . Move the hold-open unit till dead stop of the sliding block and tighten
the fixing screw . In case the max. door opening angle is smaller than 90°, the sliding block might cover the
fixing screw. In this case, the hold-open unit has to be moved till dead stop in direction of door middle after
fixing screw has been loosened. This has to be done before the door is opened and fixed in wished position.
Tighten fixing screw and adjust (as described above) the requested hold-open angle.
1
1
Montageanleitung / Assembly instruction / Notice de montage
EF (24V) mit TS-61 / 51 B
EF (24V) with TS-61 / 51 B
EF (24V) avec TS-61 / 51 B
(DIN links / DIN rechts spiegelbildlich)
(DIN left / DIN right mirror image)
(DIN gauche / DIN droite inverser l‘illustration)