Installation Guide
-7-
-Setup the battery bank
The inverter in this system requires a 24V battery bank for running.
With 2 pieces of batteries, the connection should be:
Connect 2 batteries in series to form a 24V battery bank. Method: hook
up each battery’s positive terminal to the other’s negative terminal.
The diagram as below:
-Connect solar charge controller with battery
The solar charge controller should be put indoor. After the battery bank
setup accomplished, wire the controller with battery bank. The controller
has 3 parts of ports, middle ports are for connecting with battery.
Wiring method: Use the controller-battery cable for connection, battery
+ port to one battery’s positive terminal, battery - port to the other’s neg-
ative terminal
