Inverter safety
Bayttery Safety
ALWAYS make sure inverter is OFF position and disconnect all AC and
DC.
Be careful when touching bare terminals of capacitors as they may
retain high lethal voltage even after power is removed.
Connecting when working on any circuit associated with the inverter-
when connecting battery terminals,ensure the polarity of the battery
connections is correct.Incorred polarity may cause permanent damage
to the unit.
Do not let the po)and negative(-)terminals of the battery touch
each other.
Use only sealed lead-acid,flooed,gel,or LiFePO4 batteries which musst
be deep cycle.
Be careful when working with large lead acid batteries.Wear eye protec-
tion and have fresh water avaiable in case there is contact with the
battery acid.
Over-charging and excessive gas precipitation may damage the battery
plates and activate material shedding on them.Too high of an equalizing
charge or too long of one may cause damage. Please carefully review
the specific requirements requirements of the battery used in the
system.
Installation Safety The unit should be installed in a well-ventilat-
ed,cool,and dry envirment.Make sure the fans of the unit and the venti-
lation holes are not blocked.Do not expose the unit to rain,mois-
ture,snow,or liquids of any type.
-2-
