Eco Stage V-740, User Manual

Page: 6 / 12

נד א ו ר מ ע כר ו ת ת א ט ר ון ו א ו ל פ נ י ם עב " מ | 09-7444222 |
www.danor.com
|
sales@danor.com
6
ATTENTION:
One product just can accept one input and one output.
LED7*40W DMX cables includes 3 contact pins:
Pin 1: Ground
Pin 2: Connect it to the negative pin
Pin 3: Connect it to the positive pin
The DMX cable must use the professional shielded twisted pair cable, standard loudspeaker cable
is not reliable to control the long-range data,24AWG is suitable for more than 300 meters
long-distance signal transmission and must add DMX512 signal amplifier, don’t use two output to
separate the connection, if you separate a continuous connection you will need to use a DMX
splitter.
Don’t overload the connection, one continuous connection can only support to 20 devices.
If a DMX512 splitter is used, follow this instruction:
At first connect the DMX512 splitter input terminal to controller, after that, connect it from the
splitter output terminal to next device, do as above guide to connect other device and finally
coupled with terminal insertion, to prevent system errors, the last device in a DMX chain needs to
be equipped with a terminating resistor(120ohm,1/4Watt).