STOP
PRODUCCION
PRODUCTION
LAVADO
FRESH FLUSH
eco - sistems
WATERMAKERS, S.L.
Chapter I Page 5
I.3. Electronic Control Panel
The electronic Control Panel (21), shown in the diagram
of Page 1 Chapter I consists of two push buttons that
allow for an increase or decrease in the Motor pump’s
feeding speed (4) and three buttons equipped with light
indicators that allow for a complete control of the
system.
•
The first button, from left to right, is marked with the word
PRODUCCION/PRODUCTION and it is equipped with a green LED light. It
starts the system.
•
The central button is marked with the word STOP and it is equipped with a red
LED light. It stops the system.
•
The third button, from left to right, is marked with the word LAVADO/FRESH
FLUSH and it is equipped with a blue LED light. It starts the timed Fresh Water
Flush cycle.
For a proper operation, the system doesn´t allow the change from the Production
function to the Flush function without pressing the STOP button. The flushing time
is programmed for a period of 2 minutes where the booster (feeding) pump is
turning at the 60% of the normal production r.p.m.’s.
Remote Control Panel. (Optional)
The remote control panel (23) shown in the Diagram on
Page 1 Chapter I consists of three buttons with the
corresponding 3 light indicator. It allows for a total
control of the system from a remote location on the
boat. The connection cable length is 10 meters.
• Pushing the button marked with the word PRODUCTION and a green LED makes the
system start to produce fresh water.
• Pushing the button with the word STOP will stop the system.
• The button marked with the word WASH and a blue LED starts the automated fresh
water flush.
