JINECI08 RevC 21/05/14
C
OMMISSIONING
&
H
ANDOVER
Upon completion of the installation allow a suitable
period of time for any fire cement and mortar to dry
out. A small fire may then be lit and the installation
checked to ensure the smoke and fumes are drawn
up the flue and emitted safely to atmosphere. The
stove should not be run at full output for at least 24
hours.
Read the Operating Instructions before lighting the
stove for the first time.
Leave the instructions and operating tool(s) with the
customer and advise them on -
Correct use of the appliance
The recommended fuel
Action to be taken should smoke or fumes be
emitted from the stove or installation.
The use of a fireguard when the stove is used in
the presence of children or the infirm.
Operating Instructions
Read the ‘General Guidance’ Section at the start of
these instructions before operating your stove for
the first time.
Allow sufficient clearance between the stove and
pictures, plasma screen televisions or ornaments etc,
as these could be damaged and could potentially
create a fire hazard
(For more information read the
‘Clearance Distances to Combustibles’ section of the
installation instructions).
WARNING – This appliance will be hot when in
operation and due care should be taken. The
supplied operating tool or gloves may be used to
open the door and operate the air controls.
A
EROSOLS
Do not use an aerosol spray on or near the stove
when it is alight.
A
IR
C
ONTROLS
Installed, operated and maintained correctly, this
stove will burn cleanly and efficiently. Therefore, to
avoid the disappointment of poor performance,
please familiarize yourself with the controls and
their recommended settings before use.
P
RIMARY
A
IR
The slider at the bottom of the stove controls the
primary air. This provides a conventional air draught
to the bed of the fire. The control is open when the
slider is fully to the right.
S
ECONDARY
&
T
ERTIARY
A
IR
Secondary air is controlled via the slider above the
door(s) (slide right to open), it is this “Airwash” that
keeps a clean and uninterrupted view of the fire.
Tertiary air is fixed and enters the stove through the
holes at the back of the firebox. It aids in good
secondary combustion and reduces emissions into
the chimney and environment.
Warning! -
This Appliance will be hot when in
operation and due care should be taken.
We advise that suitable gloves are used when
operating the Primary and Secondary air controls,
and when opening the door.
