General Safety
Risk of burns. Do not touch
an operating motor. Motors are designed to op-
erate at high temperatures. To avoid burns when
servicing pump, allow it to cool for 20 minutes
after shut-down before handling.
Do not allow pump or any system component to
freeze. To do so will void warranty.
Pump water only with this pump.
Periodically inspect pump and system
components.
Wear safety glasses at all times when working
on pumps.
Risk of explosion. Pump
body may explode if used as a booster pump.
Avoid exposing controls or
battery to any open flame or
sparks. Batteries can generate explosive gases.
2
A sump pump is an electrical device designed to
operate in inherently wet environments.
ALWAYS USE EXTREME CAUTION
when installing or maintaining this product!
Need Help:
Call 1-844-394-2604 for assistance;
Do Not Return to Store
Important Safety Instructions
Carefully read and follow all safety
instructions in this manual and on pump.
SAVE THESE INSTRUCTIONS – This manual
contains important instructions that should be
followed during installation, operation, and
maintenance of the product.
Save this manual for future reference.
Safety Labels
This is the safety alert symbol. When you
see this symbol on your pump or in this manual,
look for one of the following signal words and be
alert to the potential for personal injury!
Indicates a hazard which, if
not avoided, will result in death or serious injury.
Indicates a hazard which,
if not avoided, could result in death or serious
injury.
Indicates a hazard which, if
not avoided, could result in minor or moderate
injury.
NOTICE
indicates practices not related to
personal injury.
Keep safety labels in good condition. Replace
missing or damaged safety labels.
GENERAL SAFETY
STOP Before you start
